SHIPPING YOUR TRIMMER
We ship products in the mainland of North America from Los Angeles to customers via Fedex Ground. Items ordered by 3 pm are shipped the same day. Delivery is 1-5 days depending on the State.
Your trimmer is shipped discreetly in a plain brown box with a return address of TTT Innovations.
Free shipping is available for all U.S. sales of trimmers. Extra parts can be shipped USPS or Fedex at cost. Once you select your items and put them in your cart, with your shipping address, shipping options will be displayed to choose from.
We accept all major credit cards as well as money orders and bank transfer. Your purchase transaction will show on your credit card statement from TTT Innovations (Tom’s parent company).
All Tumble Trimmer come with a 1 year full warranty. The Python comes with a 3 year warranty.
QUESTIONS ABOUT THE TUMBLE TRIMMER?
Questions about Assembly
Call our 800 number to speak with someone about machine assembly.
Questions About use
Please read instructions below for preparation of your buds prior to trimming. If needed, call 800-601-0797 and press the extension for Tom for any questions about your trimming experience.
PREPARING YOUR PRODUCT TO TUMBLE
STEP 1. CUTTING AND HANGING
Cut the plant at the base of the stalk and hang upside down from a line or rope until it is dry. If you are in a dry climate, your product will dry quickly. In Southern California, for example, it takes 4-5 days. If you are in a humid climate you should have a moisture-controlled room and it may take longer.
STEP 2: De-BUDDING FROM BRANCHES
After the plant is dry – water leaves and trim around the buds are brittle) then take off the water leaves first. Cut buds from branches and place in a plastic bag or container. Discard branches and water leaves.
STEP 3: TRIMMING
Make sure the buds are brittle on the outside. If the sugar leaves bend they will not trim well. Reduce the humidity in the room and dry your material for a few hours longers.
Place the recommended amount of product in the mesh barrel on the trimmer. You should have at 2-3 inches between the product and the axle. Do not overfill the chamber.
Turn the speed control to your desired speed and watch it tumble for 2-3 minutes. Trimming will start immediately, as you will see trim passing through the mesh, down through the funnel bag into your catch bin. At 2-3 minutes, stop the machine open the zipper and check the trim level on your buds. Some strains trim in less than 3 minutes, so don’t over tumble. If the trimming is not complete, tumble another 2 minutes and check it again. Tom recommends the highest speed for most buds (35rpm) and slower speeds for light or wafey flow.
Stop and check the buds at any time in the tumbling; it does not disturb the process. It is more important to stop tumbling earlier than necessary than it is to over tumble. When the amount of trim begins to slow through the mesh and you see kief begin to pass through the mess, it is time to stop tumbling. Your product should be about 85% trimmed at this point, with very little trichomes or crystals lost. After you put our trim into another container, put an empty container under the trimmer, unzip the mesh barrel and turn on the motor until your trimmed product falls into your bin.
STEP 4: ISOLATING POPCORN SIZE NUGGETS
Unzip the net and pull the net from the velcro on the drums. Replace this net with the ¼” mesh net. Put your trim into this net, zip it up and tumble on high speed. The trim will flow through the mesh quickly and any popcorn size nuggets will remain in the barrel. Remove the clean trim from below and put a clean container underneath the trimmer. Unzip the zippers and turn on the motor to release your popcorn size nuggets into the clean container.
STEP 5: ISOLATING KIEF
Put the kief net on the barrel and put a clean catch bin below the funnel flow bag. To prepare your trim for kiefing, you can freeze it overnight, use a handful of dry ice, or use our CO2 Adaptor kit with your liquid nitrogen tank to flash freeze your trime. Fill the barrel until it is 2 inches below the axle. If you have a dust cover/kief catcher be sure to put it on the trimmer. Turn the trimmer on full speed and let it tumble for your desired time or until the kief stops passing through the mesh. The Kief will slowly pass through the kief mesh and through the funnel flow bag into your container. It will also be on the inside of the dust cover and on the funnel flow bag. You can scrape this or gently wipe it into your container.
WHICH MODEL IS BEST FOR ME?
HOW TO CHOSE YOUR MODEL
On the FEATURES page, go to the Calculator for choosing the right model. A few pointers: Choosing the right model size for you is entirely dependent on two things: 1) your weekly volume and 2) how much you like trimming. While our TTT 1900 is the most popular model in recent years, this model is best for grower who trim 10-40 pounds at a time. It does 2 pounds per 5 minute cycle or 12-15 pounds per hour. . If you trim less than this, the TTT 1600 is for you. If you trim more than this, the TTT 2200 (2-4 pounds per cycle) or the TTT 2600 (3-6 pounds per cycle) are best for you.
Call if you have any questions about this.
We strictly protect all of your personal information.
We will never sell or distribute any of your contact information.
See details elsewhere on our site.
There are no returns on used trimmers or used nets. When used according to our specifications for dryness (brittle) and weight per trimmer, the trimmers work very effectively, as described. Contact us with any issues or questions about returning your trimmer.