PYTHON 600 INDUSTRIAL TRIMMER - DISPLAY MODEL
This model has been used at tradeshows. It operates perfectly and is clean and ready for use. It has been fully refurbished. Only one available!
The Python 600 is the one machine needed to trim thousands of pounds of flower once the drying and bucking process is complete. It replaces hundreds of hand trimmers and dozens of smaller machines all in one day thanks to its exceptional productivity.
With no downtime needed to change or clean blades, this commercial flower trimmer can be ran all day, all season, year after year.
FEATURES
- Large hopper for easy feeding from storage bins or super sacks
- Manual speed-control auger to avoid over trimming
- Gravity feeder to guide the flower from hopper into the hemp flower trimmer tumbler
- Interchangeable stainless steel and food-grade plastic mesh netting in a variety of sizes
- Channels that separate the clean trim and move it into a catch bin for easy sorting
NOTE: The Python series is currently not capable of CO2 infusion. A cost-effective means of flash freezing flowers in the Python is currently under development.
Effective on Flower, Safer for You
Like all of our tumblers, the Python 600 uses Tom’s gentle bladeless tumbling technology to preserve potency while producing a beautifully trimmed product. Our industrial hemp trimmers use the friction between flowers as they tumble to gently pull the sugar leaves off. The result is flowers that look hand-trimmed with the full flower structure still intact.
Built to Last
The Python 600 has a 100% stainless steel frame with a stainless steel tumbling chamber and flower chute. It includes two industrial motors that drive the tumbler trommel and the auger that carries the trim to a catch bin. The simple design of our hemp flower trimmer means that little can go wrong.
Every Python 600 is covered by the following warranty:
- 2 year warranty: motors, speed controls, electrical components;
- 5 year warranty: steel frames, plastic augers, all welds;
with 24/7 support available from Tom’s Tumbler™.
HOW IT WORKS
The Python 600 commercial flower trimmer is fed by a gravity feed or tumbling chamber. The chamber tumbles at 35 RPM as product moves through 3 chambers of mesh netting in less than 5 minutes and exits perfectly trimmed.
The trimming speed is easily adjusted by the manual speed control motor. Clean trim is dropped through the mesh to the auger below which moves the trim to the catch bin under the chute.
ORDERING
The Python 600 can be ordered for delivery in 1-2 weeks. A 20% deposit is required to secure your hemp flower trimmer, with the balance due prior to shipping. Taxes and shipping are based on location.
QUESTIONS?
Contact us with any questions about which model of industrial hemp trimmer is best for you at 800-601-0797.
- Capacity:
- 600 lbs/hr dry or 6,000 lbs/day
- Meshes Included:
- 2 sizes of elongated stainless steel mesh screens (3/8" and 7/16") 2 sizes of food-grade plastic (1/2" and 1/4")
- Materials:
- 100% stainless steel frame with a stainless steel tumbling chamber and bud chute Food-grade plastic screw auger
- Motors:
- 3 adjustable speed control motors that drive the auger feeder, the tumbler trommel, and the auger
- Dimensions:
- Trommel: 26” in diameter Main Frame: 10'10" L x 4' W x 6'6" H Feed Hopper: 11'3" L x 5' W x 8'2" H
- Weight:
- Python 600 Frame (with everything on) - 969 lbs Python 600 Feeder Hopper (screw auger) - 510 lbs
- Maintenance:
- Brush your hemp flower trimmer with sterile brushes (included) or vacuum to collect fallen kief. Clean the catch funnel and channel with Tom’s Resin Remover and rinse with water. Remove the nets and rinse with water.
